BROKK ROBOTIC DEMOLITION MACHINES

BROKK 50

The Brokk 50 robotic demolition machine is the smallest in the Brokk range. It is small enough to get through doorways as wide as 600mm.

The Brokk 50 can be easily be transported in lifts or should the lifts not be available, climb up and down stairs.

It can be fitted with a pecker or cruncher or alternatively a bucket for digging

At 475 Kg, this lightweight machine is perfect for low load bearing floors and can replace the work load of up to four to six men.

BROKK 90

The Brokk 90 is easily transported either by trailer or pickup. It can easily pass through doorways as it is only 900mm wide. It also can be transported by lift and climb stairs if necessary 

The machine is light, weighing just 930 Kg. It can demolish small buildings and is also powerful enough to handle heavier construction jobs.

The Brokk 90 can be fitted with all the usual attachments, the cruncher, pecker and digging bucket

The Brokk 90 machines are the perfect answer to contracts where confined space demolition is required. 

 

BROKK 150

The Brokk 150 is a middle range robotic demolition machine.

It is perfect for the demolition of stair cases and floor areas. Weighing just 1630 Kg it has the weight and the strengh to be a very effective demolition machine.

The Brokk 150 has a small dozer blade front and back which is especially handy when clearing demolition material.

BROKK 180

The Brokk 180 is a flexible machine suitable for many demolition tasks within construction and demolition companies. It has the versatility and strength to work in Kiln demolition and the nuclear industries.

The Brokk 180 weighs 2030Kg and has a reach of up to five metres. It can be fitted with all the normal attachments and has a telescopic arm for longer reach.

The Brokk 180 can also use an additional attachment, the scarifier - this can make short work to concrete reduction and be used both vertically and horizontally.
 

BROKK 250

The Brokk 250 is the only Brokk in the range that has wheels rather than tracks, albeit tracks can also be fitted to this machine.

Weighing 3060 kg and having the advantage of a three part arm, it is more than capable of most heavy demolition allowing the arm to reach as much as seven metres in height. Once into position, outriggers can be lowered to give extra stability.

Either a pecker or cruncher can be used and a digger bucket if required.

BROKK 330

The Brokk 330 is the largest in the Brokk robotic demolition range.

Powered by 3 phase 415 volt 63amp 5pin, this machine is designed for very heavy demolition. It can be armed with either a breaker or a cruncher, the cruncher large enough to crunch 500mm thick concrete.

Weighing in at 4400 Kg, it can take tools weighing up to 550 Kg. This is the perfect tool for the demolition of heavily reinforced structures and can easily be manoeuvred in for kiln demolition prior to relining.